Purpose-built vacuum trucks designed to handle liquid waste, sludge and mud with maximum uptime, simple operation and proven reliability in Australian conditions.
The VTS MudVac, LiquidVac and LiteVac range of liquid vacuum trucks are purpose-built for Australian conditions, delivering tough, reliable performance without unnecessary complexity and no computer systems. The MudVac is designed to handle liquid, sludge and mud waste for heavier and more abrasive applications, while the LiquidVac focuses on bulk liquid waste collection where capacity, airflow and uptime matter most. The LiteVac is a lightweight aluminium liquid waste truck, best suited to septic and grease work where efficiency and payload are key. All three liquid vacuum trucks are engineered for practical, operator-friendly use, straightforward maintenance and long-term ownership backed by the VTS team.
A LiquidVac is a purpose-built liquid vacuum truck designed for bulk liquid waste collection and transport. It delivers strong, quiet vacuum performance with simple systems that suit high-volume, day-to-day pumping work.
In plain terms, it:
Rather than complex electronics, the LiquidVac focuses on durability, ease of use and fast turnaround on site.
In short, the LiquidVac is a reliable liquid waste truck for bulk liquid work where uptime and consistency matter.
A LiteVac is a lightweight liquid vacuum truck designed specifically for septic and grease waste applications. Using an aluminium tank to reduce weight, it maximises payload while remaining easy to operate and economical to run.
In plain terms, it:
The LiteVac is best suited to operators focused on septic pumping, grease trap servicing and routine liquid waste work.
In short, the LiteVac is the best liquid waste truck for septic and grease where simplicity and efficiency are key.
A MudVac is a heavy-duty liquid vacuum truck designed to handle liquid, sludge and mud waste. It is built for tougher applications where thicker and more abrasive materials are part of the job.
In plain terms, it:
Where lighter liquid waste trucks are not suitable, the MudVac is built to keep working.
In short, the MudVac is the liquid waste truck for heavy and abrasive waste in demanding conditions.
 LiquidvacA powerful, clean and quiet bulk liquid waste tanker.
|
 LitevacA powerful, clean and quiet aluminium bulk tanker for septic and grease.
|
 MudVacA versatile and modern solution for liquid and mud waste.
|
|
|
4x2
6x4
|
4x2
6x4
|
4x2
6x4
|
|
|
7,000 11,000 |
8,000 12,500 |
6,000 10,000 |
|
|
4x2 6x4 |
4x2 6x4 |
4x2 6x4 |
|
|
Volvo Volvo |
Volvo Volvo |
Volvo Volvo |
|
|
800 m3/h - 470 CFM liquid ring vacuum pump, hydraulically driven 1,000 m3/h - 600 CFM liquid ring vacuum pump, hydraulically driven |
800 m3/h - 470 CFM liquid ring vacuum pump, hydraulically driven 1,000 m3/h - 600 CFM liquid ring vacuum pump, hydraulically driven |
800 m3/h - 470 CFM liquid ring vacuum pump, hydraulically driven 1,000 m3/h - 600 CFM liquid ring vacuum pump, hydraulically driven |
|
|
Volvo FE 250HP with I-Shift Volvo FE 350 HP 6x4 with I-Shift |
Volvo FE 250HP with I-Shift Volvo FE 350 HP 6x4 with I-Shift |
Volvo FE 250HP with I-Shift Volvo FE 350 HP 6x4 with I-Shift |
|
|
Volvo Connect app provides vehicle performance and tracking data Volvo Connect app provides vehicle performance and tracking data |
Volvo Connect app provides vehicle performance and tracking data Volvo Connect app provides vehicle performance and tracking data |
Volvo Connect app provides vehicle performance and tracking data Volvo Connect app provides vehicle performance and tracking data |
|
|
8mm Mild Steel
|
8mm Aluminium
|
8mm Mild Steel
|
|
|
AS1210 CL3 and AS4343 compliant barrel
|
AS1210 CL3 and AS4343 compliant barrel
|
AS1210 CL3 and AS4343 compliant barrel
|
|
|
Hydraulic tipping or slant tank option
|
Hydraulic tipping or slant tank option
|
Hydraulic tipping and full rear door
|
|
|
1,200 litres of fresh water with HP Water Pump
|
1,000 litres of fresh water with HP Water Pump
|
1,200 litres of fresh water with HP Water Pump
|
|
|
Vac tested to -101kpa, pressure tested to 100kpa
|
Vac tested to -101kpa, pressure tested to 100kpa
|
Vac tested to -101kpa, pressure tested to 100kpa
|
|
|
Fully rebuildable Molex inlet valve
|
Fully rebuildable Molex inlet valve
|
Fully rebuildable Molex inlet valve
|
|
|
Stainless steel separator and manifolding
|
Stainless steel separator and manifolding
|
Stainless steel separator and manifolding
|
|
|
Rear airbag suspension
|
Rear airbag suspension
|
Rear airbag suspension
|
|
| View product | View product | View product |
Liquid vacuum trucks are typically configured to suit different waste types:
Choosing the right one depends on what you pump most often.
Common uses include:
Safety features vary by configuration but typically include sealed vacuum tanks, pressure and vacuum relief valves, shut-off systems, and controlled discharge points. Safe operation also depends on correct procedures and operator training.
Both airflow and vacuum matter:
A well-matched system gives faster loading and better control, not just a bigger number on paper.
Liquid vacuum trucks are used across:
Routine maintenance includes checking filters, seals, valves, hoses and hydraulic components. VTS trucks are designed with simple layouts and accessible service points to keep maintenance fast and straightforward.
Requirements vary depending on waste type and location. Operators must follow local council rules, EPA guidelines and disposal regulations. Always ensure waste is transported and disposed of at approved facilities.
Liquid vacuum trucks are available in a range of sizes, commonly from around 7,000 litres through to 12,500 litres. Capacity selection depends on payload limits, waste type and daily workload.
VTS liquid vacuum trucks use straightforward hydraulic and mechanical controls with no computer systems. This makes them easy to learn, easy to operate and easy to maintain.
It comes down to what you pump most often, how heavy the material is and how much capacity you need. Tell us about your work and we will recommend the right configuration for your crew and workload.
Yes. Liquid sucker truck is a common industry term for a liquid vacuum truck. Both describe trucks that use vacuum suction to collect and transport liquid waste. You might also hear them called liquid waste trucks or vacuum tankers, depending on the job and the operator.
LiquidvacA powerful, clean and quiet bulk liquid waste tanker.
|
LitevacA powerful, clean and quiet aluminium bulk tanker for septic and grease.
|
MudVacA versatile and modern solution for liquid and mud waste.
|
|
|
4x2
6x4
|
4x2
6x4
|
4x2
6x4
|
|
|
7,000 11,000 |
8,000 12,500 |
6,000 10,000 |
|
|
4x2 6x4 |
4x2 6x4 |
4x2 6x4 |
|
|
Volvo Volvo |
Volvo Volvo |
Volvo Volvo |
|
|
800 m3/h - 470 CFM liquid ring vacuum pump, hydraulically driven 1,000 m3/h - 600 CFM liquid ring vacuum pump, hydraulically driven |
800 m3/h - 470 CFM liquid ring vacuum pump, hydraulically driven 1,000 m3/h - 600 CFM liquid ring vacuum pump, hydraulically driven |
800 m3/h - 470 CFM liquid ring vacuum pump, hydraulically driven 1,000 m3/h - 600 CFM liquid ring vacuum pump, hydraulically driven |
|
|
Volvo FE 250HP with I-Shift Volvo FE 350 HP 6x4 with I-Shift |
Volvo FE 250HP with I-Shift Volvo FE 350 HP 6x4 with I-Shift |
Volvo FE 250HP with I-Shift Volvo FE 350 HP 6x4 with I-Shift |
|
|
Volvo Connect app provides vehicle performance and tracking data Volvo Connect app provides vehicle performance and tracking data |
Volvo Connect app provides vehicle performance and tracking data Volvo Connect app provides vehicle performance and tracking data |
Volvo Connect app provides vehicle performance and tracking data Volvo Connect app provides vehicle performance and tracking data |
|
|
8mm Mild Steel
|
8mm Aluminium
|
8mm Mild Steel
|
|
|
AS1210 CL3 and AS4343 compliant barrel
|
AS1210 CL3 and AS4343 compliant barrel
|
AS1210 CL3 and AS4343 compliant barrel
|
|
|
Hydraulic tipping or slant tank option
|
Hydraulic tipping or slant tank option
|
Hydraulic tipping and full rear door
|
|
|
1,200 litres of fresh water with HP Water Pump
|
1,000 litres of fresh water with HP Water Pump
|
1,200 litres of fresh water with HP Water Pump
|
|
|
Vac tested to -101kpa, pressure tested to 100kpa
|
Vac tested to -101kpa, pressure tested to 100kpa
|
Vac tested to -101kpa, pressure tested to 100kpa
|
|
|
Fully rebuildable Molex inlet valve
|
Fully rebuildable Molex inlet valve
|
Fully rebuildable Molex inlet valve
|
|
|
Stainless steel separator and manifolding
|
Stainless steel separator and manifolding
|
Stainless steel separator and manifolding
|
|
|
Rear airbag suspension
|
Rear airbag suspension
|
Rear airbag suspension
|
|
| View product | View product | View product |
